Ltg-192 Laboratory Samples High-Throughput Tissues Grinder

Basic Info

Product Description

The high-throughput tissue grinder is a common tool for laboratory sample preparation. It pulverizes, mixes, homogenizes, and breaks the sample by twisting and oscillating inside the sample tube through tungsten carbide pellets or stainless steel beads.

It can be used for rapid pulverization and homogenization of samples such as hard, soft and elastic. It meets the requirements of physical and chemical analysis laboratories, and can be equipped with grinding tanks of different volumes and materials for dry grinding, wet grinding and freeze grinding.

Sample types include: plant tissue (rice, corn, wheat, beans, peanuts, stems, petals), animal tissue (muscle, small intestine, heart, liver, lung, fur, bone, etc.), cells, bacteria, yeast, etc.

Cell disruption and DNA/RNA extraction are also available, and are widely used in agriculture, biomedicine, food, quality inspection, and universities.

Feature:

1. It can meanwhile grind 2*96 pairs of samples in 3 minutes.

2. A free choice in dry grinding,wet grinding,mixing and homogenizing treatment.

3. Sample categories provided :plant tissues ,animal tissues, cells, bacteria and yeast,etc.

4. For large-throughput sample extraction of nucleic acid, the grinder can greatly enhance the efficiency and quality of grinding.

principle:

A small steel ball (or zirconia ball) is added to the grinding tank or centrifuge tube containing the sample, and the grinding tank or adapter vibrates vertically. Under the action of high-frequency vibration, the small ball hits the sample at high speed to complete the grinding of the sample.

Grinding with a grinding ball, the grinding of the sample is more uniform and sufficient than the traditional grinding method.

Precautions:

After each use, the polishing pad must be taken. This is to prevent the polishing pad from being damaged. After use, it is best to clean the polishing pad with hot water.

Clean the base in time, wipe off the polishing agent and dust, dirt, must be wrapped around the hanging hook, and then wipe the surface layer of the power cord with a damp cloth.

Specification: